Jack,
You can actually leave the pillars on the car and remove the frame and
windshield from between them. Remove the 4 10-24 pan head screws on
each side and it will pull out. It is a bit hard to keep from chipping
the paint, but it will work. It is best to have a helper. Your other
problem will be where to cut the seal, but if you keep it a bit long and
then recut on the car, it should work. You will need a drift to force
the windshield down and in place while you put the screws back in.
Charlie
Jack Feldman wrote:
> The seal on my BT7 is all chewed up and needs to be replaced. Is there an
> easy way to do this?
>
> Does it require both pillars to be removed to get the windscreen to elevate
> for the seal to be placed?
>
> Thanks,
>
> Jack
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgcharlie@comcast.net
>
> http://www.team.net/archive
[demime 1.01d removed an attachment of type text/x-vcard which had a name of
mgcharlie.vcf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|