Moto Lita states the same part number for their hub for all
non-adjustable AH100-3000 steering columns so one can deduct that there
are no differences in the splines during the years.
-Is the steering wheel from an AH 100-3000?
-Is the steering column the proper one and of the non-adjustable
steering wheel type, as there may be differences between a steering
shaft for adjustable and non-adjustable steering wheels?
Kees Oudesluijs
NL
rrengineer @dslextreme.com schreef:
> I have a non-adjustable steering wheel that was restored by Koch's here in
> California. While the restoration job was quite satisfactory, there is
> another problem. The splines in the hub of this steering wheel do not fit
> the steering shaft splines of my steering box/shaft. The splines on the
> steering box shaft are a larger OD that the inner diameter of the top of the
> splines in the steering wheel hub. What's up with that? Are there no
> standards here, or are there different steering wheels for different years?
> Besides that, the splines are crumbling at one end of the steering wheel
> hub. Is there a fix such as a bushing for this? Or, am I destined to go to
> Moss for a replacement?
> Mike MacLean
> 56 BN2
> 60 AN5
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs@chello.nl
>
> http://www.team.net/archive
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.339 / Virus Database: 270.12.37/2130 - Release Date: 05/23/09
>07:00:00
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|