I just soldered Mine about 5 years ago and is still working fine.
Bob 1963 BJ7
--------------------------------------------------
From: <CAWS52803@aol.com>
Sent: Saturday, May 16, 2009 7:22 PM
To: <healeys@autox.team.net>
Subject: [Healeys] Headlight dipper switch - help!
> Recently the little (1") cap/button popped off it's bracket. This is the
> dimmer switch that controls the high/low headlights on my Bugeye - same as
> my
> BN4. I cleaned it up and pushed it back on, but because of the spring, it
> just pops back off. There is no apparent way to fastened it down. Even
> the
> Parts Manual doesn't show any method to secure the cap. And looking at
> the
> bracket, there is nothing that appears to be a switch to control the
> headlights. It is just a solid piece with the 3 wires connected to the
> underneath.
> Any guidance and/or explanation is greatly appreciated.
> Rudy Streng
> Lenoir, NC
> **************Recession-proof vacation ideas. Find free things to do in
> the U.S.
>
>(http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bj7ah@acanac.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|