Tom -
I just received these reamers from ENCO. They have changed the supplier -
now it has a stepped shaft. I will measure the end shape, hopefully it is
still 5/16" but this reamer is not the same as in the picture.
Alan
'52 A90
'53 BN1
'64 BJ8
On Tue, Mar 3, 2009 at 12:24 PM, <tomleavy@comcast.net> wrote:
> Sorry, forgot to paste the link:
>
> http://www.chicagolandmgclub.com/driveline00/1001/jasw.html
>
> Tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|