John, I also was missing the same panel and ordered it thru Moss. One
plus is
that it did have the big SMITH name stamped on it as original. That was a
nice surprise and
it was ready for install and fit perfect. You will also need the side
clips.
Mark
----- Original Message -----
From: "John Snyder" <helyjohn@cablespeed.com>
To: <healeys@autox.team.net>
Sent: Saturday, April 18, 2009 1:33 PM
Subject: [Healeys] Heater Part
> Does anyone have a decent, used bottom panel for the heater core box for a
> BN7? I'm doing a ground up restoration on a 1959 BN7 that has been badly
> abused. Some dumb P O threw the bottom panel away, probably thinking he
> could
> get more heat this way. Moss wants $45 for a simple sheet metal panel.
> This
> is going to be an expensive project, so would like to save a little money
> on
> the simple stuff.
>
> John Snyder
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|