Hello All,
The frame and chassis is primed and ready for replacement of the boot
floor and some other generally minor rust repairs.
However, what do people do about parts that are pitted after priming.
The part is the outer sill panel between the back of the wheel well
and the A-pillar. It is structurally sound but has some pitting in
the vertical face.
Do people skim this with a little Bondo, use high build paints of
something else?
Thank you all in advance,
John
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|