I bought the SS Bell and we slapped it on in one afternoon. One of the rear
hanger brackets had to be tweaked but otherwise fits perfect and very quiet.
Expensive but of quality. Seems like we come up against this same issue
time and time again.
Dan
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of John Sims
Sent: Wednesday, February 18, 2009 5:11 PM
To: 'David Schweninger'; 'Healey Mail List'
Subject: Re: [Healeys] Quality parts... Stainless Exhaust Revisited
I will post them with the caveat that I bought the same system for my BN6
and everything fit perfectly AND, my BN6 is a mutt with an engine out of a
BT7 and a center shift tranny.
John Sims, BN6
Aberdeen, NJ
www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of David Schweninger
Sent: Wednesday, February 18, 2009 6:02 PM
To: Healey Mail List
Subject: [Healeys] Quality parts... Stainless Exhaust Revisited
Hi guys.
Sometime back I asked the list if anyone had discovered a stainless
exhaust system that fit with a minimum of problems. The consensus was
that Falcon Systems appeared to have their quality control issues
straightened out. So I ordered a system From a Moss distributor.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|