John,
I would shy away from the paint gun. I would get a DeVilbis or Sharpe HVLP
(pot on top) gun or something similar. They are usually around $200 give or
take. The Buffalo gun might only be good for spraying primer. I wouldn't
want to shoot any two-stage paints through it.
Randy
Healey-Archaeologist
63 BJ7
60 BT7
66 Cobra replica
06 Mini Cooper S
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of john spaur
Sent: Friday, January 16, 2009 9:23 PM
To: healeys@autox.team.net
Subject: [Healeys] Buffalo Paint Spray Gun
Does anyone know if this is a quality tool?
Buffalo Tools
1 Qt. Professional Spray Gun
1 Type: Suction. Air Inlet: 1/4" N.P.T.
Cup Volume: 1 Qt. Nozzle Size: 2.0 MM
Air Compressor: 1.6 - 4.0 CFM Compressor Required: 2 - 3 HP
Operating Pressure: 50 - 70 P.S.I.
Kragen sells it for about $25!
I know you usually get what you pay for but sometimes you get more
and sometimes you get less.
John
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|