Did you lose the welch plug in the rear end of the intake manifold?Bill
Lawrence> From: tfsbj7@mindspring.com> To: healeys@autox.team.net> Date: Tue,
6 Jan 2009 22:13:06 -0500> Subject: [Healeys] Mystery....part 3> > My next
test was to check the cylinder compression ..perhaps I'd blown a> head gasket?
(In all 6 cylinders simultaneously?).. Yes, I'm clearly> grasping at straws at
this point. As you might have guessed the cylinder> compressions tested:
1-157, 2-147, 3-144, 4-147, 5-152, and 6-147..No> problem there. > >
------------------------------> Check on "part 2" to find what I found was THE
ANSWER!!!.... > > In the meantime, see if you can tell what the problem was
yourself..:-) (I> believe, you have all the information you need to diagnose
the problem, but> you do have to know the workings of a BJ8 to figure out what
was causing my> problem.)> > Thanks> -skip saunders-> BJ8 -Gladys-> BJ7
-Harriett-> _______________________________________________> Support Team.Net
http://www.team.net/donate.html> > Healeys@autox.team.net>
http://autox.team.net/mailman/listinfo/healeys> > You are subscribed as
ynotink@msn.com> > http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|