Thanks to all. mystery solved. heater motor switch.
Thanks!
_____
From: WILLIAM B LAWRENCE [mailto:ynotink@msn.com]
Sent: Sunday, January 04, 2009 1:30 AM
To: satkinson7314@charter.net; healeys@autox.team.net
Subject: RE: [Healeys] wiring harness
I have a case of battling references. The Autopress manual by Kenneth Ball
shows Green/Brown (GN) as being the wire between the turn signal flasher and
terminal 1 on the brake/turn relay box. The Drake manual agrees with that
information, but also shows a GN wire between the heater switch and the
heater motor. Ball shows a GY wire for that. I guess its a matter of
isolating the GN wire and tracing it to its end.
Have fun.
Bill Lawrence
> From: satkinson7314@charter.net
> To: healeys@autox.team.net
> Date: Sat, 3 Jan 2009 23:29:57 -0500
> Subject: [Healeys] wiring harness
>
> Just want to make sure (since I can't find this on the wiring diagram).
>
>
>
> I installed a new wiring harness today and everything matches up EXCEPT. I
> have two wires coming out of the of the instrument cluster (smaller
section
> of this harness) that are GREEN and GREEN/Brown. These wires branch off
from
> the key switch (WHITE, WHITE, BROWN/blue).
>
> Are these mystery, at least for me, wires for the small green warning lamp
> and wired to the dynamo(generator)? This is the only reference to
> GREEN/Brown that I can find.
>
>
>
> Thanks,
>
>
>
> Simon
>
> 1959 BT7L
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as ynotink@msn.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|