How about Motor Wheel Services. (MWS) Its in the UK but their web sight
does say that they do
restore wire wheels and they are the Moss ww provider now.
Mark
----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: "Healeys" <healeys@autox.team.net>
Sent: Wednesday, December 31, 2008 5:22 PM
Subject: [Healeys] Dunlop Wire Wheel Restoration
> Hello all,
>
> First a quick history lesson.....
>
>>From the beginning of Austin Healey production in mid 1953, all he BN1
>>cars up
> 'till mid summer 1954 approx. the first 4500 BN1's were equipped with the
> earlier flat pressed hub 48 spoke painted Dunlop wire wheels. After that
> point, the wheels fitted to the cars had a deeper depressed hub section
> and
> the wires were laced with a slightly deeper bias, making for a stronger
> wheel
> when sideways forces were applied.
> However, these early wheels have a noticeable visual difference and when
> attempting an accurate restoration on these cars, the early wheels should
> be
> fitted.
> In the past, Dayton Wire Wheel Company were willing to strip, restore,
> relace
> and finish these wheels for an obvious extra cost (not an issue here). It
> seems as of now, they will no longer accept doing these wheel restorations
> any
> longer.
> Is there anybody else out there in the world who will restore these
> wheels?
>
> Rich Chrysler
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|