The belleville washers are spring washers that are used to set the end float
and maintain tension on the steering shaft. They also allow the depth of
engagement of the worm and peg to be adjusted. If the catalog calls for six I
think you will need six. Bill Lawrence> Date: Sun, 28 Dec 2008 09:10:30 -0800>
From: bspidell@comcast.net> To: healeys@autox.team.net> Subject: [Healeys]
Steering box question> > Folks,> > According to the Moss catalog, the steering
box in our 100 requires SIX > "belleville washers." One, I can see, but
6???!!!> > Anybody know the story on these? It looks as if the shaft pivots
on > these, but why six? At $2+/per, I don't want to order six if not >
required, but if that's what it takes ...> > > Bob> > -- >
*******************************************************************> Bob
Spidell San Jose, CA bspidell@comcast.net>
*******************************************************************>
_______________________________________________> Support Team.Net
http://www.team.net/donate.html> > Healeys@autox.team.net>
http://autox.team.net/mailman/listinfo/healeys> > You are subscribed as
ynotink@msn.com> > http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|