Marvin,
my guess is that the vibrations are not drivetrain-related. Vibrations
occuring only at certain engine speeds are more likely to be engine-related.
Eric
Heinsberg/Germany
www.brits-n-pieces.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Marvin James
Sent: Wednesday, December 10, 2008 4:27 PM
To: Healeys@autox.team.net
Subject: [Healeys] Flywheel Timing Marks BN1
When I rebuilt my BN1 engine I used a lightened flywheel that came with the
car (basket case). I don't know who did the machining of the flywheel but it
was nice work. The 1/4 timing mark had disappeared with the machining. The
rest of the engine machining was done locally by a machinist familiar with
Brit iron and having a good reputation. He also balanced everything. Right
after he finished my engine and before I assembled it he retired so was not
available for consultation.
My question:
What was the purpose of the original 1/4 timing marks? With the flywheel
balanced, why should orientation make any difference?
My problem:
I've got an annoying vibration that comes on about 1500 RPM and I'm looking
for ideas. As soon as I convince myself it's not the driveshaft (don't think
it is), the gearbox comes out and the flywheel and clutch cover plate will
be rebalanced. I may go back to the stock flywheel. Not excited about
tearing a car apart when I don't even have it together yet.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|