James,
I believe it can be repaired. Remove the penned cap and replace the
cable inside. It is the same cable as the speedo (you need to use the
end that is square). Also check to make sure that your speedo main
bearing has not siezed. That is what usually causes the angle drive
to break in the first place.
John
'62 BT7
At 08:47 PM 11/12/2008 -0800, you wrote:
>discovered the small gear that drives odometer has stripped. none of my
>catalogs show this part. anyone have one or know where i can get one? hjim
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|