I finally got the OD unit onto the gearbox and installed over the weekend. I
took the car for a test drive and the OD unit would not engage. The solenoid
worked fine. Therefore, I figured there was a hydraulic issue. I got a hold
of a service manual and decided to pull off the solenoid bracket and take out
the pump valve. I also took out the one on the right side of the OD unit.
After cleaning and re-installing valves, I looked inside and noticed when I
would turn the driveshaft the pump spring would not compress. I figured the
pump may not be contacting the oil cam on the mainshaft and is not working
properly. Am I right thinking this? Can the pump possibly be stuck? Any
suggestions?
Kenny
61 BT7
_________________________________________________________________
See how Windows connects the people, information, and fun that are part of
your life.
http://clk.atdmt.com/MRT/go/msnnkwxp1020093175mrt/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|