healeys
[Top] [All Lists]

Re: [Healeys] Photos of HD8 DMD installation

To: Bob Spidell <bspidell@comcast.net>
Subject: Re: [Healeys] Photos of HD8 DMD installation
From: "Steve B. Gerow" <steveg@abrazosdata.com>
Date: Wed, 10 Sep 2008 06:23:44 -0700
Bob,
See my reply to Lin Rose on the newsgroup for standoff reasoning.
On my website is another gallery showing the original modification of the
K&N filter. 
Basically I swapped the outside plates to the inside and on the rear moved
the hole down all the way against the filter. I blanked the outside holes
where you can't see them with pieces of aluminum pie plate.
-- 
Steve Gerow
Pasadena CA
59 BN6


> From: Bob Spidell <bspidell@comcast.net>
> Date: Wed, 10 Sep 2008 06:00:36 -0700
> To: "Steve B. Gerow" <steveg@abrazosdata.com>
> Subject: Re: [Healeys] Photos of HD8 DMD installation
> 
> Hi Steve,
> 
> Why did you need the standoff for the rear carb (very clever, BTW ;)?
> 
> Did you find air cleaners--look like K&N--with the holes cut offset, or
> do it yourself?
> 
> Thanks,
> 
> 
> bs
> 
> Steve B. Gerow wrote:
>> Have uploaded photos of my revised DMD installation--moving from HD6s to
>> HD8s.
>> 
>> http://www.pbase.com/stevegerow/dmd2inch
>> 
>> no passwords reqired
>> 
>> 
> 
> 
> -- 
> *******************************************************************
> Bob Spidell           San Jose, CA            bspidell@comcast.net
> *******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>