Listers,
Thanks for all the replies as to the conversion of mounting the
alternator in place of the generator.
Obviously I was not clear what I was looking for. I have the alternator
installed, belt on and adjusted, brown wire connected to alternator.
I gutted the regulator, and expect to make the connections inside the
cover, using the same wiring connections to the connectors outside the
reg box. My question is what wires connect to what inside the box. I am
aware the ground is no longer used.
Thanks,
Jim
CONFIDENTIALITY NOTICE
The information contained in this e-mail is intended only for the use of the
individual or entity to which it is addressed and it may contain information
that is privileged or confidential. If the reader of this message is not the
intended recipient (or the employee or agent responsible to deliver it to the
intended recipient), you are hereby notified that any dissemination,
distribution, or copying of this communication is prohibited. If you have
received this e-mail in error, please notify us by telephone at the number
listed above or by return e-mail.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|