healeys
[Top] [All Lists]

Re: [Healeys] Classic Tube - SS Brake lines - advice?

To: "Alan Seigrist" <healey.nut@gmail.com>, "Healey" <Healeys@autox.team.net>
Subject: Re: [Healeys] Classic Tube - SS Brake lines - advice?
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
Date: Sun, 3 Aug 2008 09:22:12 -0400
Sorry Alan no experience with Classic.   Why the need for stainless? 
Wouldn't the copper/nickel
serve the same purpose.   The copper / nickel, pre cut, kit that I got from 
Moss served me very well and the " bendie" characteristic of this material 
is very forgiving.

It was very simple to use the old lines as a pattern and at least get the 
bends and angles close enough for a little fine tweaking when installing on 
the car.    I was very happy with the final results.  And the cost was very 
reasonable.

Mark


----- Original Message ----- 
From: "Alan Seigrist" <healey.nut@gmail.com>
To: "Healey" <Healeys@autox.team.net>
Sent: Sunday, August 03, 2008 8:09 AM
Subject: [Healeys] Classic Tube - SS Brake lines - advice?


> Hi All -
>
> In the process of planning on a complete teardown and rebuild of my BJ8.
>
> I was wondering if any of you have ordered the prebent brake lines from
> Classic Tube?  Do they fit well?
>
> I asked Mr. Finespanner but he only does mild steel and I really need SS 
> for
> my car here in HK, so no need to refer me to him, he already referred me 
> to
> Classic Tube.
>
> Thanks,
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem@sbcglobal.net
>
> http://www.team.net/archive 
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>