Thanks, Rich.
bs
Rich C wrote:
> The rear brakes can give you a false clearance with the hand brake
> cable partially applying prssure on the shoes. Release the hand brake
> clevis pin from the bellcrank actuator to allow the rods and levers to
> let the shoes to fully come to rest, then adjust the rear show
> clearance so they are just skimming the drums, then finally reinstall
> the hand brake clevis pin and adjust it for amount of slackness required.
>
> Rich Chrysler
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|