Hello Folks,
Thanks to all with for help with my brake lines.
I am installing new front wheel bearings and seal. I have the seal level with
the end of the hub. It could go in towards the bearing another 1/4" to fully
seat against the land but then it seems it would not seal as well as the lip
is close to the bearing. It may not make any difference but I thought I would
check. Any thoughts?
Thanks
Wes Keyes
York, Maine
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|