Hi Steve,
Gary at Rocker Arm had mentioned to me that the head would have to be worked
on so the push rods wouldn't rub with the 1:1.6 assembly. This was several
years ago, maybe they have changed the design. Also, have you checked the
exhaust valve-to-block clearance with the new rockers installed?
-----Original Message Snip-----
Yesterday I replaced my rocker assy with a 1.6 high-lifter from Rocker Arm
Specialist in Anderson, CA.
pix at http://pbase.com/stevegerow/rockers
Just finished driving about 20 mi street & freeway at 85 degrees
ambient--problem seems to have disappeared.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|