healeys
[Top] [All Lists]

Re: [Healeys] Again with the BN6 Flasher Relay

To: <healeys@autox.team.net>
Subject: Re: [Healeys] Again with the BN6 Flasher Relay
From: "M Lempert" <mlempert@bellsouth.net>
Date: Fri, 6 Jun 2008 11:18:51 -0400
I have an untested relay in my BN7 (ebay purchase). I replaced the original 
because of some funky wiring that sort of indicated not all was well with 
it.  I'd like to test the thing before firing up the car for the first time 
(plenty of time). Does anyone have a good bench test method for the relay ?

Regards,
Mike Lempert

> On Fri, Jun 6, 2008 at 8:44 AM, john close <f9cougar@yahoo.com> wrote:
>> Sorry if y'all are getting sick of this.I got all excited about Norman 
>> Nock's advice to clean the contacts and whipped that sucker on out of the 
>> Healey and took off the cover. Dang if it isn't a modern kind with a 
>> printed circuit board and 2 little relays. I forgot I replaced the 
>> original one years ago. Putting on my specs and examining it more 
>> closely, though, I saw that the little copper strip from the #5 terminal 
>> had fried a little and broken it's litle old self. That explains the inop 
>> brake lights. I'm a-wonderin' could I solder in a little bridge between 
>> the rivets on either side of the break? Seems like that'd work.... What 
>> do you think? What about the cause? All inputs totally welcome. Thank 
>> you - JRC
>>
>> PS - A little irony here. Years ago, I had an engineering job with the 
>> Air Force's Space Division. Big problem on satellites back then was 
>> crazing of printed circuit boards. Now I have the same problem on my 
>> 59-year-old Healey.
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>