On the carb side of the engine, there is an oil galley just above the engine
mounts. At the front of the engine, there is a hole that I assume is filled
with a bolt or plug. I can't seem to find what the threads are for that hole.
I thought was 1/8 pipe theads but I just bought a plug at ACE hardware and it
does not fit. Looks like it must be tapered?
Any help.
Jerry
BJ8 engine
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|