David,
Great post!!
Clutch linkage failed on BN2 due to the short shaft that's
welded to the chassis being not horizontal (earlier speedbump incident) and
putting force on the washer and split pin. Split pin failed. Fixed at roadside
(jack, pliers, hammer, assortment of split pins).
Mike Brooks
'56 BN2 (car now
repatriated to Aboyne, Scotland, UK, from Milano Italy; I'm now in Qatar in
the Middle East and missing my Healey)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|