Hi Folks,
To install a power outlet, such as for charging a cell phone, in a car with
a positive ground electrical system, is it simply a matter of running a wire
from the positive post on the power outlet to a adequate ground, running a
wire from the negative post on the power outlet to a "hot" wire such as one
of the terminals with a white wire on the ignition switch, and then
isolating the metal portions of the power outlet body from touching any
metal parts on the car?
I also plan on installing an in-line fuse in the wire to the ignition
switch.
Thanks for your help.
Ron Ray
[demime 1.01d removed an attachment of type application/ms-tnef which had a
name of winmail.dat]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|