The body number is stamped on the louvred engine hood on the lelt hand side
lip near the top, if you find this number it should be a Factory100M. To fit
the cold air box the support strut is bent and a notched bracket was fitted at
the factory.The distributor number is 7H1727. The frornt X support in front of
the rad. should be bent to fit the high lift camshaft 1B2892. It should have 1
3/4 SU carbs.Send the vin number to the British Motor Industy Heritge Trust.
Kenny
Vancouver BC
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|