Tadek -
If I recall most Healey guys that do the BN1/BN2 foam take the foam
for the 6-cyl cars and trim it to fit.
Also, if you are close to 6 ft tall or more you will need to cut holes
in the bottom of the foam so you sit low enough in the car.
No patterns are available but if you have the clausager and roger
moment books you will have enought picures for your trimmer to copy.
Alan
On 3/23/08, Tadeusz Malkiewicz <tadeusz.malkiewicz@plusnet.pl> wrote:
> Gentleman,
>
> I hope I will not be out of the line to ask a question on redoing my seats
> in the BN2..
>
> Mind you, these seats have nothing to do with politics... :-)
>
> I have seats recovered about 20 yeas ago to vinyl, so I do not have the
> original patterns. I do have the leather (I bought Connolly hide in UK). Can
> someone help me with pictures with measurements on the seat pattern?
>
> I would also like to change the seat foam, and am looking for a supplier of
> original type of Dunlop style seat bottom foam, preferably in Europe.
> I do know AH Spares has standard, single layer foam only.
> Or maybe someone has instructions how to go about doing the Dunlop foam? My
> upholstery guys are pretty good..
>
>
> Thanks, Tadek
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|