Brad, the only way to properly set up the upper trunnion is to set it
on a alignment rack. So what we do is set the offset in the center of
the arc and then take the car to our alignment shop and have the set
the camber and toe. You want to set the camber at.
Camber left Between 0 and 1/4 degrees neg
right Between 0 and 1/4 degrees neg
Toe 1/8 toe in
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Mar 16, 2008, at 7:37 AM, mail.maineguide.com wrote:
> I just purchased new bushings for my BJ8 from BCS including the
> offset upper
> trunions. To show how brain dead I am I can't figure out which way the
> offset should go. Many thanks
> Brad Holden
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|