think we found the answer to the carb problem. healeyguy perry from hawaii
gave me the specs on the needle and i meaused the needle on the piston. it
was ,89 instead of .125 and was noticeably thinner than the needle on my bj8.
i have the feeling that someone many years ago put the wrong kit in the carbs,
which could explain the problem i had in getting the old jets out. anyway,
new needles on the way and will give a success report after installation.
hjim
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|