Patton,
Try using your fingerail and scraping it off. Since it is oil base it may
still be soft,
If no, next try some paint thinner (MINERAL SPIRITS) from hardware store and
soft rag. It will not harm urethane clearcoats.
If your clearcoat is a little dulled from scrubbing use a little polishing
compound to bring back the shine.
Carroll Phillips Top Down Restorations
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|