The bushing must be reamed to fit the idler shaft. You should have a machine
shop do this for accurate fitting.
Gary Hodson
In a message dated 2/7/2008 10:06:50 A.M. Central Standard Time,
info@atteanlodge.com writes:
Amongst many other projects, I decided to rebuild the steering idler on my
BJ8. Ordered new seals and bushings from Moss, got the old bushings
out,lubed and pressed new ones in, identical to the old ones or so it seems.
Problem now is I cannot re-insert idler shaft unless using VERY big hammer,
also reamed ends of bushings slightly with dremel tool to take care of any
mushrooming. any ideas?? Thanks.
Brad Holden
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as warthodson@aol.com
http://www.team.net/archive
**************Biggest Grammy Award surprises of all time on AOL Music.
(http://music.aol.com/grammys/pictures/never-won-a-grammy?NCID=aolcmp003000000025
48)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|