Ray
I believe you mean near the end of the BN1 run.
As you say until the change over a Burman box was supplied with a three
hole end plate. After that is was Cam Gears with a four hole end plate.
Regards
> Thanks for your reply. The steering boxes I'm working on are the
>early ones with a triangular end plate with the olive for the stator
>tube. It sounds like you have a later box. The change came near the
>end of the BN-2 run and that box was used to the mid-BN-6 run.
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|