Mike -
Before going any further double check the solenoid and make sure that when
the switch clicks, that the solenoid is activating to the correct length.
That's usually the problem with what you describe. You can try activating
the lever manually as you drive down the road (beware of your pant leg and
the prop shaft!) and see if it kicks in.
Alan
On 1/26/08, Mike Goode <mgoode2@cox.net> wrote:
>
> I have a BJ8 that I just got back from paint (3 weeks). I have owned the
> car
> for 7 years and never had an issue with the overdrive. Now, after picking
> it
> up, the OD doesn't work. I noticed the OD switch was "on" when I picked it
> up
> but didn't think anything about it. On the way home, nothing...no OD.
> I took the tunnel off and the solenoid clicks when I am in 3rd gear so I
> know
> it is not an electrical issue. Any suggestions? A friend said the plunger
> needs to be moved up and down since he thinks overall, the OD is
> "bulletproof". I change the tranny oil annually and just did it 2 months
> ago.
> If I need to move the plunger back and forth, is there an easy way to do
> it?
>
> Thanks,
>
> Mike Goode
> Scottsdale
> BJ8/40462
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|