I would suspect that to be a #10 screw, with 32 thread (fine), with oval
head.
SS screws in that size are pretty common at hardware stores if that would
work.
Mark
----- Original Message -----
From: "Alan" <alanb@nfahc.co.uk>
To: "'Healey List'" <healeys@autox.team.net>
Sent: Wednesday, January 23, 2008 3:36 PM
Subject: [Healeys] Fasteners - Specifications.
> Hey gang.
> I have an arcane fastener question that I am struggling with.
>
> The screws used to retain the aluminium cockpit trim rails are listed as
> RPP0312's. The decode of this identifies them as Raised Countersunk
> screws,
> Chrome plated with pointed tips. No.10 thread and 3/4" long.
>
> That's good so far - but what is a No.10 screw thread, or a No.6 (02) for
> that matter?
>
> Many thanks.........
> _______________________________________________
> (______________ Alan Bromfield _______________)
> (______ \____1957-BN4 ___/ _______)
> (_________________________)
> http://www.nfahc.co.uk
> http://www.healey-weekend.com
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgtrcars@galaxyinternet.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|