healeys
[Top] [All Lists]

Re: [Healeys] Cam

To: gregwilkinson@roadrunner.com, healeys@autox.team.net
Subject: Re: [Healeys] Cam
From: "WILLIAM B LAWRENCE" <ynotink@msn.com>
Date: Mon, 21 Jan 2008 04:46:36 +0000
I went the Isky way with my 100. It cost me $80 plus shipping. They had 
several grinds to choose from and I picked the E99+4 whatever that means. It 
has 260 degrees of duration (as opposed to 230 degrees standard) with 46 
degrees of overlap. Valve lift is .425" (as opposed to .390" standard). The 
engine starts, runs and idles nicely and is not lumpy. Of course it will put 
the engine it was before in the dust, but it was pretty weak before so I 
really don't have a way of comparing before and after. Also I think I need 
to add some carburetion and will probably try to find a way to hang some H6s 
and a set of headers on it in the future. Someone on the list said they had 
trouble dealing with Isky and couldn't get timely service from them. My 
experience was that Ron is the only one who deals with older cam grinds and 
is sometimes out of pocket, but I was not in a hurry and when I did talk to 
him he was very courteous and helpful. He explained to me the 
characteristics of the various grinds and helped me decide. Once the 
decision was made and the cam shipped to them the service was quite prompt. 
I am very satisfied with the result. I'll let you know if I change my mind 
after the carb and exhaust upgrades... in 10 or 15 years.

Bill Lawrence


>From: "Greg Wilkinson" <gregwilkinson@roadrunner.com>
>To: "Healey List" <healeys@autox.team.net>
>Subject: Re: [Healeys] Cam
>Date: Sun, 20 Jan 2008 18:26:24 -0800
>
>I had Iskenderian ( http://www.iskycams.com ) regrind my BJ8 cam, specs 
>are:
>268? total duration, can't remember lobe lift, intake 27-61, exhaust 61-27.
>Cost about $100. They don't list the regrind on their website anymore, may
>want to call and talk to Ron (Ed's son) to see if they still do it. I also
>went with higher ratio rockers (1:1.55) Remember, that building a
>performance engine is a package deal. Longer duration cams won't do a whole
>lot until you match intake and exhaust for the application you're looking
>for.
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>