Mark,
You can do the same thing as they do at the factory but spend a bit more time
at it - use jewelers rouge and a good soft cotton buffing wheel. The results
should be just fine provided you don't buff right through the plating!
Keith Pennell
> There are very noticeable swirl marks in the metal. Either the job wasn't
> finished or Mohamed grabbed the wrong buffing compound.
>
> Yes I can return the mirrors if I want. But I need mirrors and these things
> would work well if I can get the swirls marks out and the price was right. All
> the mirrors in stock look the same, per the Moss salesman.
>
> Of course I don't want to make them any worse.
>
> Can you guys give me some swirl removal ideas. If not, they're going back.
>
> Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|