Does any one know of a place like this in the northeast??
-----Original Message-----
From: healeys-bounces+todd.s.taylor=lmco.com@autox.team.net
[mailto:healeys-bounces+todd.s.taylor=lmco.com@autox.team.net] On Behalf
Of joe mulqueen
Sent: Thursday, January 03, 2008 1:33 AM
To: healey list
Subject: [Healeys] re. Frame and Chassis restoration
Hello John,
There's a place 15 miles north of Santa Rosa, CA that
dips:
http://www.norcalstripping.com/
Regards,
Joe Mulqueen
Santa Clara, CA
MGA
BT7 project
Date: Wed, 02 Jan 2008 19:50:36 -0800
From: john spaur <jmsdarch@sbcglobal.net>
Subject: [Healeys] Frame and Chassis restoration
Hello all and Happy New Year!
I am at the point where it is time to repair the frame and replace sheet
metal chassis parts and find I need the collective wisdom of "The
List".
I went through the archives at Team Net, AHClub USA and my own but still
have questions.
I would like to have my frame and chassis chemically dipped to clean it
and dissolve rusted sheet metal areas.
1. If I have the frame chemically dipped will it remove undercoating,
POR-15, and the mastic that was used to attach the front shroud?
2. I am told the frame will start rusting (surface
type) soon after
dipping. I presume a phosphoric acid treatment will minimize this and
allow the steel to wait a few days before it is prime painted. Is this a
correct presumption?
3. I live in San Jose, California (San Francisco Bay Area), does anyone
know of companies in the Bay Area (or Northern
California)
that will do the work I need?
Thank you so much and Happy New Year!
John
'62 BT7
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|