List: Some had a question about mounting and antenna. I solved the problem by
getting a thin piece of sheet metal and cutting it to size and shape and then
mounted it between the rear bumper and the rear surround. To do this I suggest
making a template out of cardboard, less likely to scratch the paint. The
bracket was then bolted to the right rear bumper bracket. Radio Shack had an
extra long cable and just hid the excess under the dash. Regardib static a
resistor attached to the distributor solved the problem. I was able to get the
resistor at an old parts store. No holes drilled in the sheet metal. Good
luck, John
---------------------------------
Never miss a thing. Make Yahoo your homepage.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|