I use a light coating of anti-seize grease on the hubs and haven't noticed any
leaking through. I'd never use regular grease.
>
> From: Charlie Frazer <cfrazer@jcomm.uoregon.edu>
> Date: 2007/12/07 Fri AM 12:40:21 CST
> To: healeys@autox.team.net
> Subject: [Healeys] Sealing WW spoke heads
>
> Im restoring a set of Dunlop wire wheels.
> Im to the point where the painting is complete and Ive been told its
> important to seal the spoke heads on the inside of the hub to prevent
> grease from the splines being thrown out of the hub and down the
> spokes.
> Ive used clear silicone to seal the spoke heads inside the outboard
> neck of the hub. Is it important to seal the heads on the back (wide
> side) of the hub as well?
> Thanks for your help.
> Charlie
> cfrazer@uoregon.edu
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|