John:
I had mine rebuilt by John Stuart Brake Co out of Stoney Creek, Ontario.
Have yet to try it but the job looks good and they guaranteed it. Rich C
recommended them so I was comfortable. Their web site is
www.johnstuartpowerbrake.com and tele # 905-662-7274. Make sure you tell
them whether you want to go concours or not on the finish work.
Dan
-----Original Message-----
From: healeys-bounces+dan=warner-associates.com@autox.team.net
[mailto:healeys-bounces+dan=warner-associates.com@autox.team.net] On Behalf
Of Rebecca Sawyer
Sent: Tuesday, November 27, 2007 9:12 PM
To: healeys@autox.team.net
Subject: [Healeys] FW: BJ8 Brake servo problem
From: John Sawyer [johnbeckysawyer@yahoo.com]
Sent: Tuesday, November 27, 2007 7:49 PM
To: 'healeys@autox.team.net'
Subject: BJ8 Brake servo problem
I have a 65 with a servo that is not original, I think it's Australian.
Patton's Brake Replacements (PBR). Recently the engine runs rough when
brakeing. At idle the engine idle speeds up slightly when brakes are
applied. I think the problem is with the servo affecting the intake
manifold. Any one have experience with this?
Can the servo be rebuilt?
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|