If it is still stuck tap one end with a hammer or lightly towards the shaft,
this should bring the other end up and either loosen it to the point where
you can get it out or get a better grip with a needle nose pliers.
I know it sounds like whacking with a hammeris my solution to everything,
butin this case it will work. If you cant get it with a pliers once you
have rasied one end up you can either work it backand forth with the light
tapping or ise a scrrewdriver or chisel between the crankshaft and the key
and once again a little tapping and it should pop out.
Greg Lemon
54 BN1
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|