almost every healey in our club that has a problem with shake has the brake
drums out of balance. one car shook so bad on the jack stands i was afraid it
was going to jump off the stands. i took them to the local crankshaft
balancing shop here in vegas and the machinist made a special jig to balance
them by grinding off metal in the heavy spots. i would think any good
machinist could do this at a balancing shop. i also have used the bubble
balancing method but it is not quite as accurate as the machine shop.
healeymanjim
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|