A friend had a similar problem with a tank that had been coated inside. He
found that the coating was separating from the tank. A large "sheet" of the
coating would float up to the pick up in the tank and plug the pick up. Blowing
back into the tank would temporarily release the coating from the pickup, but
the problem would return after driving for a short time. It was difficult to
determine that this was the problem because the sheet of coating was too large
to
go into the pickup tube & show up in the filter.
Gary Hodson
In a message dated 10/9/2007 10:33:20 AM Central Daylight Time,
kansl@net1plus.com writes:
quick kote was put into the gas
tank
In a message dated 10/9/2007 10:33:20 AM Central Daylight Time,
kansl@net1plus.com writes:
quick kote was put into the gas
tank
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|