[Healeys] Re rear axle breather

[Daniel and Diane White <dwhite4949@wowway.com>]

My 1962 BN7 MK II was built with the breather being some sort of tube 
(not threaded) pressed (I guess) into the hole in the top of the axle.  
Upon restoration I found that there was no breather assy- just the hole- 
not a good situation.  I examined the hole and found there were no 
threads so I tapped the hole to accept the threaded breather assy which 
is available. 
Dan White
1962 BN7
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys