Keith,
That would make a great tech article!!!
Patton (4 drum 100-Six)
On 10/5/07, pennell@cox.net <pennell@cox.net> wrote:
>
>
> One word of note. I have found that balancing the rear drums makes a HUGE
> difference in the shake. I have bubble balanced several drums and they all
> required anywhere from about .5 up to 2 ounces of steel rod welded to the
> perimeter of the drums!!! If you can get hold of an old fashioned bubble
> balancer and have some welding capabilities then you can do that
> yourself. I borrowed the balancer from my friendly mechanic.
>
> --
> Patton Dickson - http://Austin-Healeys.com - Plano, TX
> 1957 Austin-Healey 100-Six "Built to run 'til the road wears out."
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|