By the time the front kick panels are sandwich in there and the washers for
the screws, the space will be taken up.
Rich Chrysler
----- Original Message -----
From: "Alan Seigrist" <healey.nut@gmail.com>
To: <wericars@aol.com>
Cc: <healeys@autox.team.net>
Sent: Saturday, August 18, 2007 11:52 PM
Subject: Re: [Healeys] Dash bracket shims?
> Bill -
>
> That does seem like too much space to me. Are the brackets properly
> mounted
> on the back of your dash? the edge of the bracket should be more or less
> flush with the bottom corner of each side of the dash. I can send you
> pictures of mine? There aren't any washers or spacers... it just fits
> right.
>
> Alan
>
>
> On 8/19/07, wericars@aol.com <wericars@aol.com> wrote:
>>
>> Hello list.? It is a great day for working on a Healey restoration!? As I
>> install my dash, I notice there is quite a bit of space between the end
>> brackets and the chassis where the bolt secures the dash to the door
>> frame.?
>> I'd say about a quarter to a half inch on either side.? Is there a shim
>> or
>> spacer that is supposed to go between the bracket and the chassis?? I see
>> nothing in the Parts Books or the Moss catalogue.
>>
>>
>> Bill
>> Boston area
>> 65 BJ8
>>
>> ________________________________________________________________________
>> AOL now offers free email to everyone. Find out more about what's free
>> from AOL at AOL.com.
>> _______________________________________________
>> healey.nut@gmail.com
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>
>
>
> --
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
> _______________________________________________
> richchrysler@quickclic.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|