David:
Were there not 2 pulleys used on the late (BJ8) generator - both a 3/8" and
then the 1/2"? What I'm getting at is I believe that there were two 3/8"
pulleys, one with the correct hole size for the BJ8 generator - so if Rick
had the later 3/8" pulley, it should do what he wants it to.
Earl Kagna
Victoria, B.C.
BT7 tri-carb
BJ8
----- Original Message -----
From: "David Nock" <healeydoc@sbcglobal.net>
To: "Rick Swain and Wendy Grant" <grain@auracom.com>
Cc: "Healey List" <healeys@autox.team.net>
Sent: Thursday, July 05, 2007 8:33 AM
Subject: Re: [Healeys] Generator pulley
No, the inside diameter is different.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
..
On Jul 5, 2007, at 8:03 AM, Rick Swain and Wendy Grant wrote:
> On a BJ8 generator with 1/2" pulley, can the pulley be replaced with
> a 3/8" one without modification. In other words can a late generator
> be used on an earlier car by simply replacing the pulley?
>
> Thanks
>
> Rick Swain
> '59 BN4
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|