Re: Timing mark

[Awgertoo@aol.com]

In a message dated 5/20/2007 4:27:08 PM Eastern Daylight Time, 
sdesalvo@frontiernet.net writes:

The arrow can only be viewed from a
side angle which makes it impossible to know when it aligns with the pulley
mark.

Sam--
 
Put some white paint on both the dimple and the notch on the pulley--they 
will show up in the strobe.  I do not have vacuum advance on my Mallory Unilite 
and simply set total advance to about 33 degrees at around 3K revs.
 
Best--Michael Oritt