This brace goes from the top bolt in the steering column "clamp" to the
upper (of the 2) bolts that fasten the windshield post. The brace installs
w/ the tabs pointing down. The brace does have a slight bend in it about 6"
in from the left end.. This from my BT7 which is original, unrestored.
John Snyder
> Can anyone tell me where the sideways steering column brace attaches.
> Moss # 200( P.128). It's shown as a straight piece which runs into
> everything- wiper motor, oil and temp. lines. I have a part which appears
> to be the brace. however it's bent into a wide "U" with the ends parallel
> But not at 90 degrees. the only place it seems to fit is from the
> steering column clamp bolt to the second windshield post bolt. Any ideas?
> Thanks,
>
> Dave and Daisy
|