SV: Ring Gears

["Per Schoerner" <healeyguy@bredband.net>]

Hi
OK, I stand corrected, sorry for the confusion.



Best regards, Per


>"Replacing a ring gear involves destroying the old gear"  - Not true.
>
>The ring gear can easily be removed without damage to the parts.  You must
>use a large brass drift (1.5 to 2" in diameter) and substantial hammer
>against the ring gear.  Using a brass drift prevents any damage to the ring
>gear.  Set the flywheel on a platform so that the flywheel is supported but
>not the ring gear.